All Steel Dry Cargo Container Body

Specification:

• All steel Dry Cargo containers are the most economical solution for transportation of general purpose commodities.
• The containers are fabricated out of press formed MS steel sections for both structural and panelling.
• The container after assembly will be shot blasted and primer coated for rust and corrosion protection.
• The container floor shall be of composite plywood with PU varnish finish.
• The container will have a pair of fully open type doors at the rear and a side door can be provided as an option.
• Each door panel is provided with EPDM door seal ('J'cum 'C' type) and the doors will be water tight in closed condition.
• The containers are integrated with the chassis with the help of sub frame and fasteners.
• The container roof weld joints are coated with 3mm FRP lining for rust and corrosion protection.
• There shall be 2 No lights for the interior, 2 No ventilators and 4 No indicator lights.
• Dry Cargo containers with Flat side panels using interlocking type Aluminium extruded sections is also available as an option.